Skip to content

T
Toy-MT-Introduction
Commit 6b36bcd6 by zhoutao
Options

合并分支 'caorunzhe' 到 'zhoutao' 

Caorunzhe 2 zhoutao

查看合并请求 !192
parents c85bad55 21c17f54
正在显示 包含 341 行增加 和 147 行删除
Book/Chapter4/Figures/cky-algorithm.tex
......@@ -9,7 +9,7 @@
\begin{scope}[scale=0.85]
\node[srcnode] (c1) at (0,0) {\normalsize{\textbf{Function} CKY-Algorithm($\textbf{s},G$)}};
\node[srcnode,anchor=north west] (c21) at ([xshift=1.5em,yshift=0.4em]c1.south west) {\normalsize{\textbf{fore} $j=0$ to $ J - 1$}};
\node[srcnode,anchor=north west] (c21) at ([xshift=1.5em,yshift=0.4em]c1.south west) {\normalsize{\textbf{for} $j=0$ to $ J - 1$}};
\node[srcnode,anchor=north west] (c22) at ([xshift=1.5em,yshift=0.4em]c21.south west) {\normalsize{$span[j,j+1 ]$.Add($A \to a \in G$)}};
\node[srcnode,anchor=north west] (c3) at ([xshift=-1.5em,yshift=0.4em]c22.south west) {\normalsize{\textbf{for} $l$ = 1 to $J$}};
\node[srcnode,anchor=west] (c31) at ([xshift=6em]c3.east) {\normalsize{// length of span}};
......
Book/Chapter5/Figures/fig-code-niutensor-one.tex
......@@ -25,5 +25,45 @@
\end{tikzpicture}
\end{center}
\end{tcolorbox}
\hspace{0.1in} \scriptsize{(a) 构建单层神经网络}
\\
\begin{tcolorbox}
[bicolor,sidebyside,width=11cm,righthand width=4cm,size=title,frame engine=empty,
colback=blue!10!white,colbacklower=black!5!white]
{\scriptsize
\begin{tabbing}
\texttt{XTensor x, y, h1, h2;} \\
\texttt{XTensor w1, b1, w2, w3;} \\
\texttt{InitTensor3D(\&x, 3, 4, 5);} \\
\texttt{InitTensor2D(\&w1, 5, 3);} \\
\texttt{InitTensor1D(\&b1, 3);} \\
\texttt{InitTensor2D(\&w2, 3, 6);} \\
\texttt{InitTensor2D(\&w3, 6, 4);} \\
\texttt{...} \\
\texttt{h1 = Sigmoid(MMul(x, w1) + b1);} \\
\texttt{h2 = HandTanH(MMul(h1, w2));} \\
\texttt{y = Relu(MMul(h2, w3));}
\end{tabbing}
}
\tcblower
\begin{center}
\begin{tikzpicture}
\node [draw,circle,inner sep=2pt,fill=red!30!white,blur shadow={shadow xshift=1pt,shadow yshift=-1pt}] (x) at (0,0) {\footnotesize{$\textrm{x}$}};
\node [anchor=south,draw,rounded corners,inner sep=2pt,minimum width=4em,fill=green!30!white,blur shadow={shadow xshift=1pt,shadow yshift=-1pt}] (layer1) at ([yshift=0.7em]x.north) {\scriptsize{layer1}};
\node [anchor=south,draw,rounded corners,inner sep=2pt,minimum width=4em,fill=green!30!white,blur shadow={shadow xshift=1pt,shadow yshift=-1pt}] (layer2) at ([yshift=1.0em]layer1.north) {\scriptsize{layer2}};
\node [anchor=south,draw,rounded corners,inner sep=2pt,minimum width=4em,fill=green!30!white,blur shadow={shadow xshift=1pt,shadow yshift=-1pt}] (layer3) at ([yshift=1.0em]layer2.north) {\scriptsize{layer3}};
\node [anchor=south,draw,circle,inner sep=2pt,fill=red!30!white,blur shadow={shadow xshift=1pt,shadow yshift=-1pt}] (y) at ([yshift=0.7em]layer3.north) {\scriptsize{$\textrm{y}$}};
\draw [thick,->] (x.north) -- (layer1.south);
\draw [thick,->] (layer1.north) -- (layer2.south);
\draw [thick,->] (layer2.north) -- (layer3.south);
\draw [thick,->] (layer3.north) -- (y.south);
\node [anchor=west,align=left] (xshape) at (x.east) {\tiny{shape: 3*4*5}};
\node [anchor=west,align=left] (yshape) at (y.east) {\tiny{shape: 3*4*4}};
\node [anchor=south west,align=left,inner sep=2pt] (l1shape) at (layer1.north) {\tiny{shape: 3*4*3}};
\node [anchor=south west,align=left,inner sep=2pt] (l2shape) at (layer2.north) {\tiny{shape: 3*4*6}};
\end{tikzpicture}
\end{center}
\end{tcolorbox}
\hspace{0.1in} \scriptsize{(b) 构建三层神经网络}
%%%------------------------------------------------------------------------------------------------------------
Book/Chapter5/Figures/fig-code-niutensor-three.tex deleted 100644 → 0
%%%------------------------------------------------------------------------------------------------------------
\begin{tcolorbox}
[bicolor,sidebyside,width=11cm,righthand width=4cm,size=title,frame engine=empty,
colback=blue!10!white,colbacklower=black!5!white]
{\scriptsize
\begin{tabbing}
\texttt{XTensor x, y, h1, h2;} \\
\texttt{XTensor w1, b1, w2, w3;} \\
\texttt{InitTensor3D(\&x, 3, 4, 5);} \\
\texttt{InitTensor2D(\&w1, 5, 3);} \\
\texttt{InitTensor1D(\&b1, 3);} \\
\texttt{InitTensor2D(\&w2, 3, 6);} \\
\texttt{InitTensor2D(\&w3, 6, 4);} \\
\texttt{...} \\
\texttt{h1 = Sigmoid(MMul(x, w1) + b1);} \\
\texttt{h2 = HandTanH(MMul(h1, w2));} \\
\texttt{y = Relu(MMul(h2, w3));}
\end{tabbing}
}
\tcblower
\begin{center}
\begin{tikzpicture}
\node [draw,circle,inner sep=2pt,fill=red!30!white,blur shadow={shadow xshift=1pt,shadow yshift=-1pt}] (x) at (0,0) {\footnotesize{$\textrm{x}$}};
\node [anchor=south,draw,rounded corners,inner sep=2pt,minimum width=4em,fill=green!30!white,blur shadow={shadow xshift=1pt,shadow yshift=-1pt}] (layer1) at ([yshift=0.7em]x.north) {\scriptsize{layer1}};
\node [anchor=south,draw,rounded corners,inner sep=2pt,minimum width=4em,fill=green!30!white,blur shadow={shadow xshift=1pt,shadow yshift=-1pt}] (layer2) at ([yshift=1.0em]layer1.north) {\scriptsize{layer2}};
\node [anchor=south,draw,rounded corners,inner sep=2pt,minimum width=4em,fill=green!30!white,blur shadow={shadow xshift=1pt,shadow yshift=-1pt}] (layer3) at ([yshift=1.0em]layer2.north) {\scriptsize{layer3}};
\node [anchor=south,draw,circle,inner sep=2pt,fill=red!30!white,blur shadow={shadow xshift=1pt,shadow yshift=-1pt}] (y) at ([yshift=0.7em]layer3.north) {\scriptsize{$\textrm{y}$}};
\draw [thick,->] (x.north) -- (layer1.south);
\draw [thick,->] (layer1.north) -- (layer2.south);
\draw [thick,->] (layer2.north) -- (layer3.south);
\draw [thick,->] (layer3.north) -- (y.south);
\node [anchor=west,align=left] (xshape) at (x.east) {\tiny{shape: 3*4*5}};
\node [anchor=west,align=left] (yshape) at (y.east) {\tiny{shape: 3*4*4}};
\node [anchor=south west,align=left,inner sep=2pt] (l1shape) at (layer1.north) {\tiny{shape: 3*4*3}};
\node [anchor=south west,align=left,inner sep=2pt] (l2shape) at (layer2.north) {\tiny{shape: 3*4*6}};
\end{tikzpicture}
\end{center}
\end{tcolorbox}
%%%------------------------------------------------------------------------------------------------------------
Book/Chapter5/Figures/fig-code-tensor-define-2.tex
......@@ -10,5 +10,33 @@
}
\end{flushleft}
\end{tcolorbox}
\hspace{0.1in} \scriptsize{(a) NiuTensor定义张量程序}
\\
\begin{tcolorbox}[enhanced,width=11cm,frame engine=empty,boxrule=0.1mm,size=title,colback=blue!10!white]
\begin{flushleft}
{\scriptsize
\begin{tabbing}
\texttt{XTensor a, b, c;} \hspace{11.5em} \= // 声明张量tensor \\
\texttt{InitTensor1D(\&a, 10, X\_INT);} \> // 10维的整数型向量\\
\texttt{InitTensor1D(\&b, 10);} \> // 10维的向量，缺省类型(浮点)\\
\texttt{InitTensor4D(\&c, 10, 20, 30, 40);} \> // 10*20*30*40的4阶张量(浮点)
\end{tabbing}
}
\end{flushleft}
\end{tcolorbox}
\hspace{0.1in} \scriptsize{(b) 定义张量的简便方式程序}
\\
\begin{tcolorbox}[enhanced,width=11cm,frame engine=empty,boxrule=0.1mm,size=title,colback=blue!10!white]
\begin{flushleft}
{\scriptsize
\begin{tabbing}
\texttt{XTensor tensorGPU;} \hspace{10.5em} \= // 声明张量tensor \\
\texttt{InitTensor2D(\&tensorGPU, 10, 20,} $\backslash$ \> // 在编号为0的GPU上定义张量 \\
\hspace{6.7em} \texttt{X\_FLOAT, 0);}
\end{tabbing}
}
\end{flushleft}
\end{tcolorbox}
\hspace{0.1in} \scriptsize{(c) 在GPU上定义张量程序}
%%%------------------------------------------------------------------------------------------------------------
Book/Chapter5/Figures/fig-code-tensor-define-3.tex deleted 100644 → 0
%%%------------------------------------------------------------------------------------------------------------
\begin{tcolorbox}[enhanced,width=11cm,frame engine=empty,boxrule=0.1mm,size=title,colback=blue!10!white]
\begin{flushleft}
{\scriptsize
\begin{tabbing}
\texttt{XTensor a, b, c;} \hspace{11.5em} \= // 声明张量tensor \\
\texttt{InitTensor1D(\&a, 10, X\_INT);} \> // 10维的整数型向量\\
\texttt{InitTensor1D(\&b, 10);} \> // 10维的向量，缺省类型(浮点)\\
\texttt{InitTensor4D(\&c, 10, 20, 30, 40);} \> // 10*20*30*40的4阶张量(浮点)
\end{tabbing}
}
\end{flushleft}
\end{tcolorbox}
%%%------------------------------------------------------------------------------------------------------------
Book/Chapter5/Figures/fig-code-tensor-define-GPU.tex deleted 100644 → 0
%%%------------------------------------------------------------------------------------------------------------
\begin{tcolorbox}[enhanced,width=11cm,frame engine=empty,boxrule=0.1mm,size=title,colback=blue!10!white]
\begin{flushleft}
{\scriptsize
\begin{tabbing}
\texttt{XTensor tensorGPU;} \hspace{10.5em} \= // 声明张量tensor \\
\texttt{InitTensor2D(\&tensorGPU, 10, 20,} $\backslash$ \> // 在编号为0的GPU上定义张量 \\
\hspace{6.7em} \texttt{X\_FLOAT, 0);}
\end{tabbing}
}
\end{flushleft}
\end{tcolorbox}
%%%------------------------------------------------------------------------------------------------------------
Book/Chapter5/Figures/fig-code-tensor-mul.tex deleted 100644 → 0
%%%------------------------------------------------------------------------------------------------------------
\begin{tcolorbox}[enhanced,width=11cm,frame engine=empty,boxrule=0.1mm,size=title,colback=blue!10!white]
\begin{flushleft}
{\scriptsize
\begin{tabbing}
\texttt{XTensor a, b, c;} \hspace{10.0em} \= // 声明张量tensor \\
\texttt{InitTensor4D(\&a, 2, 2, 3, 4);} \> // a为2*2*3*4的4阶张量 \\
\texttt{InitTensor2D(\&b, 4, 5);} \> // b为4*5的矩阵 \\
\texttt{a.SetDataRand();} \> // 随机初始化a \\
\texttt{b.SetDataRand();} \> // 随机初始化b \\
\texttt{c = MMul(a, b);} \> // 矩阵乘的结果为2*2*3*5的4阶张量
\end{tabbing}
}
\end{flushleft}
\end{tcolorbox}
%%%------------------------------------------------------------------------------------------------------------
Book/Chapter5/Figures/fig-code-tensor-operation.tex
......@@ -17,5 +17,22 @@
}
\end{flushleft}
\end{tcolorbox}
\hspace{0.1in} \scriptsize{(a) 张量进行1阶运算}
\\
\begin{tcolorbox}[enhanced,width=11cm,frame engine=empty,boxrule=0.1mm,size=title,colback=blue!10!white]
\begin{flushleft}
{\scriptsize
\begin{tabbing}
\texttt{XTensor a, b, c;} \hspace{10.0em} \= // 声明张量tensor \\
\texttt{InitTensor4D(\&a, 2, 2, 3, 4);} \> // a为2*2*3*4的4阶张量 \\
\texttt{InitTensor2D(\&b, 4, 5);} \> // b为4*5的矩阵 \\
\texttt{a.SetDataRand();} \> // 随机初始化a \\
\texttt{b.SetDataRand();} \> // 随机初始化b \\
\texttt{c = MMul(a, b);} \> // 矩阵乘的结果为2*2*3*5的4阶张量
\end{tabbing}
}
\end{flushleft}
\end{tcolorbox}
\hspace{0.1in} \scriptsize{(b) 张量之间的矩阵乘法}
%%%------------------------------------------------------------------------------------------------------------
Book/Chapter5/Figures/fig-rnn-model.tex
%%%------------------------------------------------------------------------------------------------------------
\begin{tikzpicture}
\begin{scope}
\tikzstyle{rnnnode} = [draw,inner sep=5pt,minimum width=4em,minimum height=1.5em,fill=green!30!white,blur shadow={shadow xshift=1pt,shadow yshift=-1pt}]
......@@ -63,7 +62,7 @@
\draw [->,thick] ([xshift=0.1em]node14.east)--([xshift=1em]node14.east);
{
\node [anchor=south] (toplabel1) at ([yshift=2em,xshift=-2em]node32new.north) {\footnotesize{``苹果''的表示：}};
\node [anchor=south] (toplabel1) at ([yshift=2em,xshift=-1.3em]node32new.north) {\footnotesize{``苹果''的表示：}};
\node [anchor=west,fill=blue!20!white,minimum width=3em] (toplabel2) at (toplabel1.east) {\footnotesize{上下文}};
}
{
......@@ -83,5 +82,3 @@
\end{scope}
\end{tikzpicture}
\ No newline at end of file
%%%------------------------------------------------------------------------------------------------------------
Book/Chapter5/Figures/fig-sawtooth.tex
......@@ -45,7 +45,7 @@
\end{scope}
%%%%%%%%%%%%%%%%%%%%%%%%%%%
\begin{scope}[yshift=-2in]
\begin{scope}[yshift=-1.8in]
\node [anchor=center,color=red] (node1) at (0,0) {};
......
Book/Chapter5/Figures/fig-transformer-LM.tex
\begin{tikzpicture}
\begin{scope}
\node [anchor=west] (w0) at (0,0) {\footnotesize{$w_{0}$}};
\node [anchor=west] (w1) at ([xshift=6.5em]w0.east) {\footnotesize{$w_{1}$}};
\node [anchor=west] (w2) at ([xshift=6.5em]w1.east) {\footnotesize{$w_{2}$}};
\node [anchor=west] (w3) at ([xshift=6.5em]w2.east) {\footnotesize{$w_{3}$}};
\node [anchor=west] (w1) at ([xshift=7em]w0.east) {\footnotesize{$w_{1}$}};
\node [anchor=west] (w2) at ([xshift=7em]w1.east) {\footnotesize{$w_{2}$}};
\node [anchor=west] (w3) at ([xshift=7em]w2.east) {\footnotesize{$w_{3}$}};
\node [anchor=north] (index0) at ([yshift=0.5em]w0.south) {\footnotesize(index)};
\node [anchor=north] (index1) at ([yshift=0.5em]w1.south) {\footnotesize(index)};
\node [anchor=north] (index2) at ([yshift=0.5em]w2.south) {\footnotesize(index)};
\node [anchor=north] (index3) at ([yshift=0.5em]w3.south) {\footnotesize(index)};
{
\node [anchor=south,line width=0.8pt,draw,inner sep=3pt,fill=blue!20!white] (e0) at ([yshift=1em]w0.north) {\footnotesize{$\textbf{e}_0=w_{0} \textbf{C} + \textrm{PE}(0)$}};
\node [anchor=south,line width=0.8pt,draw,inner sep=3pt,fill=blue!20!white] (e1) at ([yshift=1em]w1.north) {\footnotesize{$\textbf{e}_1=w_{1} \textbf{C} + \textrm{PE}(1)$}};
\node [anchor=south,line width=0.8pt,draw,inner sep=3pt,fill=blue!20!white] (e2) at ([yshift=1em]w2.north) {\footnotesize{$\textbf{e}_2=w_{2} \textbf{C} + \textrm{PE}(2)$}};
\node [anchor=south,line width=0.8pt,draw,inner sep=3pt,fill=blue!20!white] (e3) at ([yshift=1em]w3.north) {\footnotesize{$\textbf{e}_3=w_{3} \textbf{C} + \textrm{PE}(3)$}};
\node [anchor=south,line width=0.8pt,draw,inner sep=3pt,fill=blue!30!white,minimum width=7.5em] (e0) at ([yshift=1em]w0.north) {\footnotesize{$\textbf{e}_0=w_{0} \textbf{C} + \textrm{PE}(0)$}};
\node [anchor=south,line width=0.8pt,draw,inner sep=3pt,fill=blue!30!white,minimum width=7.5em] (e1) at ([yshift=1em]w1.north) {\footnotesize{$\textbf{e}_1=w_{1} \textbf{C} + \textrm{PE}(1)$}};
\node [anchor=south,line width=0.8pt,draw,inner sep=3pt,fill=blue!30!white,minimum width=7.5em] (e2) at ([yshift=1em]w2.north) {\footnotesize{$\textbf{e}_2=w_{2} \textbf{C} + \textrm{PE}(2)$}};
\node [anchor=south,line width=0.8pt,draw,inner sep=3pt,fill=blue!30!white,minimum width=7.5em] (e3) at ([yshift=1em]w3.north) {\footnotesize{$\textbf{e}_3=w_{3} \textbf{C} + \textrm{PE}(3)$}};
}
{
\node [anchor=south,line width=0.8pt,draw,inner sep=3pt,fill=ugreen!20!white] (h0) at ([xshift=-0.5em, yshift=2.0em]e0.north) {\footnotesize{$\textbf{h}_{0}=\textrm{SelfAtt}(\textbf{e}_0,\textbf{e}_3)$}};
\node [anchor=south,line width=0.8pt,draw,inner sep=3pt,fill=ugreen!20!white] (h1) at ([xshift=0.5em, yshift=2.0em]e1.north) {\footnotesize{$\textbf{h}_{1}=\textrm{SelfAtt}(\textbf{e}_1,\textbf{e}_3)$}};
\node [anchor=south,line width=0.8pt,draw,inner sep=3pt,fill=ugreen!20!white] (h2) at ([xshift=1.5em, yshift=2.0em]e2.north) {\footnotesize{$\textbf{h}_{2}=\textrm{SelfAtt}(\textbf{e}_2,\textbf{e}_3)$}};
\node [anchor=south,line width=0.8pt,draw,inner sep=3pt,fill=green!30!white] (h0) at ([ yshift=2.0em]e0.north) {\footnotesize{$\textbf{h}_{0}=\textrm{SelfAtt}(\textbf{e}_0,\textbf{e}_3)$}};
\node [anchor=south,line width=0.8pt,draw,inner sep=3pt,fill=green!30!white] (h1) at ([ yshift=2.0em]e1.north) {\footnotesize{$\textbf{h}_{1}=\textrm{SelfAtt}(\textbf{e}_1,\textbf{e}_3)$}};
\node [anchor=south,line width=0.8pt,draw,inner sep=3pt,fill=green!30!white] (h2) at ([ yshift=2.0em]e2.north) {\footnotesize{$\textbf{h}_{2}=\textrm{SelfAtt}(\textbf{e}_2,\textbf{e}_3)$}};
}
{
\node [anchor=south,line width=0.8pt,draw,minimum width=9em,inner sep=3pt,fill=orange!20!white] (f1) at ([xshift=0.5em, yshift=2.0em]h2.north) {\footnotesize{$\textbf{f}_3=\textrm{FNN}([\textbf{h}_0,\textbf{h}_1,\textbf{h}_2,\textbf{e}_3])$}};
\node [anchor=south,line width=0.8pt,draw,minimum width=9em,inner sep=3pt,fill=orange!20!white] (o1) at ([yshift=1.2em]f1.north) {\footnotesize{$\textbf{y}=\textrm{Softmax}(f_3 \textbf{U})$}};
\node [anchor=south,line width=0.8pt,draw,minimum width=9em,inner sep=3pt,fill=orange!30!white] (f1) at ([yshift=2.0em]h2.north) {\footnotesize{$\textbf{f}_3=\textrm{FNN}([\textbf{h}_0,\textbf{h}_1,\textbf{h}_2,\textbf{e}_3])$}};
\node [anchor=south,line width=0.8pt,draw,minimum width=9.5em,inner sep=3pt,fill=orange!30!white] (o1) at ([yshift=1.2em]f1.north) {\footnotesize{$\textbf{y}=\textrm{Softmax}(f_3 \textbf{U})$}};
}
\node [anchor=south] (ylabel) at ([yshift=1.2em]o1.north) {\footnotesize{$\textrm{P}(w_4|w_{0}w_{1}w_{2}w_{3})$}};
......@@ -34,11 +34,11 @@
\draw [->,line width=0.6pt] ([yshift=0.1em]w2.north) -- ([yshift=-0.1em]e2.south);
\draw [->,line width=0.6pt] ([yshift=0.1em]w3.north) -- ([yshift=-0.1em]e3.south);
\draw [->,line width=0.6pt] ([yshift=0.1em]e0.north) -- ([xshift=0em,yshift=-0.1em]h0.south);
\draw [->,line width=0.6pt] ([yshift=0.1em]e1.north) -- ([xshift=-0.5em,yshift=-0.1em]h1.south);
\draw [->,line width=0.6pt] ([yshift=0.1em]e2.north) -- ([xshift=-1em,yshift=-0.1em]h2.south);
\draw [->,line width=0.6pt] ([yshift=0.1em]e3.north) -- ([xshift=1em,yshift=-0.1em]h0.south);
\draw [->,line width=0.6pt] ([yshift=0.1em]e3.north) -- ([xshift=1em,yshift=-0.1em]h1.south);
\draw [->,line width=0.6pt] ([yshift=0.1em]e3.north) -- ([xshift=1em,yshift=-0.1em]h2.south);
\draw [->,line width=0.6pt] ([yshift=0.1em]e1.north) -- ([xshift=0em,yshift=-0.1em]h1.south);
\draw [->,line width=0.6pt] ([yshift=0.1em]e2.north) -- ([xshift=0em,yshift=-0.1em]h2.south);
\draw [->,line width=0.6pt] ([yshift=0.1em]e3.north) -- ([xshift=0.4em,yshift=-0.1em]h0.south);
\draw [->,line width=0.6pt] ([yshift=0.1em]e3.north) -- ([xshift=0.4em,yshift=-0.1em]h1.south);
\draw [->,line width=0.6pt] ([yshift=0.1em]e3.north) -- ([xshift=0.4em,yshift=-0.1em]h2.south);
\draw [->,line width=0.6pt] ([yshift=0.1em]h0.north) -- ([xshift=-2em,yshift=-0.1em]f1.south);
\draw [->,line width=0.6pt] ([yshift=0.1em]e3.north) -- ([xshift=2em,yshift=-0.1em]f1.south);
......
Book/Chapter5/Figures/fig-weather.tex
......@@ -18,7 +18,7 @@
\node [rectangle,rounded corners,draw=black!50,densely dashed,inner sep=0.4em] [fit = (part2-1) (part2-2) (hidlabel) ] (inputshadow) {};
\node [circle,anchor=west,draw=ublue,minimum width=2.5em,fill=blue!20,inner sep=2pt] (part2-3) at ([xshift=2.0em,yshift=-1.7em]part1-3.east) {\scriptsize {偏置2}};
\node [anchor=north,minimum width=3.0em] (part2-4) at ([xshift=0.0em,yshift=-1.6em]part2-3.south) {\scriptsize{隐藏层}};
\node [anchor=north] (labela) at ([xshift=0.0em,yshift=-4em]part2-3.south) {\footnotesize {(a)}};
\node [anchor=north] (labela) at ([xshift=0.0em,yshift=-3em]part2-3.south) {\footnotesize {(a)}};
%右
\node [anchor=west,draw=ublue,minimum width=3.0em,fill=purple!20] (part3-1) at ([xshift=2em,yshift=0.0em]part2-2.east) {\scriptsize {穿衣指数}};
......@@ -67,7 +67,7 @@ y
\node [rectangle,rounded corners,draw=black!50,densely dashed,inner sep=0.4em] [fit = (part2-1) (part2-2) (hidlabel) ] (inputshadow) {};
\node [circle,anchor=west,draw=ublue,minimum width=2.5em,fill=blue!20,inner sep=2pt] (part2-3) at ([xshift=2.0em,yshift=-1.7em]part1-3.east) {\large {$b^{[2]} $}};
\node [anchor=north,minimum width=3.0em] (part2-4) at ([xshift=0.0em,yshift=-1.6em]part2-3.south) {\scriptsize{隐藏层}};
\node [anchor=north] (labelb) at ([xshift=0.0em,yshift=-4em]part2-3.south) {\footnotesize {(b)}};
\node [anchor=north] (labelb) at ([xshift=0.0em,yshift=-3em]part2-3.south) {\footnotesize {(b)}};
%右
......
Book/Chapter6/Figures/figure-GRU03.tex
......@@ -100,10 +100,10 @@
\draw[-latex,emph] (aux71) -| (aux53) -- (aux23) -| (aux46) -- (z76);
\draw[emph] (aux12) |- (aux23) -| (aux46);
\node[opnode,rectangle,rounded corners=2pt,inner sep=2pt,draw=red,thick] (tanh) at (aux46) {$\mathrm{tanh}$};
\node[opnode,circle,draw=red,thick] () at (aux53) {X};
\node[opnode,circle,draw=red,thick] () at (aux56) {X};
\node[opnode,circle,draw=red,thick] () at (aux75) {X};
\node[opnode,circle,draw=red,thick] () at (aux76) {\textbf{+}};
\node[opnode,circle,draw=red,thick] (a1) at (aux53) {};
\node[opnode,circle,draw=red,thick] (a2) at (aux56) {};
\node[opnode,circle,draw=red,thick] (a3) at (aux75) {};
\node[opnode,circle,draw=red,thick] (a4) at (aux76) {};
}
\end{scope}
......@@ -121,5 +121,15 @@
\node[draw,very thick,rectangle,fill=blue!10!white,rounded corners=5pt,inner sep=6pt,fit=(aux22) (aux76) (z76) (tanh)] (GRU) {};
\end{pgfonlayer}
%%new
\draw[-] (a1.north west) -- (a1.south east);
\draw[-] (a1.north east) -- (a1.south west);
\draw[-] (a2.north west) -- (a2.south east);
\draw[-] (a2.north east) -- (a2.south west);
\draw[-] (a3.north west) -- (a3.south east);
\draw[-] (a3.north east) -- (a3.south west);
\draw [-,line width=0.8pt] (a4.north) -- (a4.south);
\draw [-,line width=0.8pt] (a4.west) -- (a4.east);
\end{tikzpicture}
\ No newline at end of file
Book/Chapter6/Figures/figure-LSTM02.tex
......@@ -94,7 +94,7 @@
\draw[emph] (aux12) -- (aux22) -- (aux23);
\node[opnode,circle,draw=red,thick] () at (aux34) {$\sigma$};
\node[opnode,rectangle,rounded corners=2pt,inner sep=2pt,draw=red,thick] () at (aux35) {$\mathrm{tanh}$};
\node[opnode,circle,draw=red,thick] (i45) at (aux45) {X};
\node[opnode,circle,draw=red,thick] (i45) at (aux45) {};
}
\end{scope}
......@@ -111,5 +111,8 @@
\node[draw,very thick,rectangle,fill=blue!10!white,rounded corners=5pt,inner sep=4pt,fit=(aux22) (aux58) (u55) (o27)] (LSTM) {};
\end{pgfonlayer}
%%new
\draw[-] (i45.north west) -- (i45.south east);
\draw[-] (i45.north east) -- (i45.south west);
\end{tikzpicture}
\ No newline at end of file
Book/Chapter6/Figures/figure-LSTM03.tex
......@@ -101,13 +101,13 @@
\draw[-latex,standard] (aux21) -- (aux25) -- (u55);
\node[opnode,circle] () at (aux34) {$\sigma$};
\node[opnode,rectangle,rounded corners=2pt,inner sep=2pt] () at (aux35) {$\mathrm{tanh}$};
\node[opnode,circle] (i45) at (aux45) {X};
\node[opnode,circle] (i45) at (aux45) {};
}
% cell update
{
\draw[-latex,emph] (aux51) -- (aux59);
\node[opnode,circle,draw=red,thick] (f53) at (aux53) {X};
\node[opnode,circle,draw=red,thick] (u55) at (aux55) {\textbf{+}};
\node[opnode,circle,draw=red,thick] (f53) at (aux53) {};
\node[opnode,circle,draw=red,thick] (u55) at (aux55) {};
}
\end{scope}
......@@ -128,5 +128,12 @@
\node[draw,very thick,rectangle,fill=blue!10!white,rounded corners=5pt,inner sep=4pt,fit=(aux22) (aux58) (u55) (o27)] (LSTM) {};
\end{pgfonlayer}
%%new
\draw[-] (i45.north west) -- (i45.south east);
\draw[-] (i45.north east) -- (i45.south west);
\draw[-] (f53.north west) -- (f53.south east);
\draw[-] (f53.north east) -- (f53.south west);
\draw [-,line width=0.8pt] (u55.north) -- (u55.south);
\draw [-,line width=0.8pt] (u55.west) -- (u55.east);
\end{tikzpicture}
\ No newline at end of file
Book/Chapter6/Figures/figure-LSTM04.tex
......@@ -102,7 +102,7 @@
\draw[-latex,standard] (aux21) -- (aux25) -- (u55);
\node[opnode,circle] () at (aux34) {$\sigma$};
\node[opnode,rectangle,rounded corners=2pt,inner sep=2pt] () at (aux35) {$\mathrm{tanh}$};
\node[opnode,circle] (i45) at (aux45) {X};
\node[opnode,circle] (i45) at (aux45) {};
}
% cell update
{
......@@ -112,12 +112,12 @@
}
{
\draw[-latex,standard] (aux51) -- (aux59);
\node[opnode,circle] (f53) at (aux53) {X};
\node[opnode,circle] (u55) at (aux55) {\textbf{+}};
\node[opnode,circle] (f53) at (aux53) {};
\node[opnode,circle] (u55) at (aux55) {};
}
% output gate
{
\node[opnode,circle,draw=red,thick] (o27) at (aux27) {X};
\node[opnode,circle,draw=red,thick] (o27) at (aux27) {};
\draw[-latex,emph] (u55) -| (o27);
\draw[-latex,emph] (aux21) -- (o27);
\draw[emph] (aux12) -- (aux22) -- (aux23);
......@@ -147,5 +147,14 @@
\node[draw,very thick,rectangle,fill=blue!10!white,rounded corners=5pt,inner sep=4pt,fit=(aux22) (aux58) (u55) (o27)] (LSTM) {};
\end{pgfonlayer}
%%new
\draw[-] (i45.north west) -- (i45.south east);
\draw[-] (i45.north east) -- (i45.south west);
\draw[-] (f53.north west) -- (f53.south east);
\draw[-] (f53.north east) -- (f53.south west);
\draw [-,line width=0.8pt] (u55.north) -- (u55.south);
\draw [-,line width=0.8pt] (u55.west) -- (u55.east);
\draw[-] (o27.north west) -- (o27.south east);
\draw[-] (o27.north east) -- (o27.south west);
\end{tikzpicture}
\ No newline at end of file
Book/Chapter6/Figures/figure-beam-search-process.tex
......@@ -40,7 +40,7 @@
\node [anchor=west,inner sep=2pt] (o4) at ([xshift=0.3em]o3.east) {\scriptsize{...}};
}
\node [wnode,anchor=north] (wt1) at ([yshift=-0.8em]t1.south) {\scriptsize{$\langle$eos$\rangle$}};
\node [wnode,anchor=north] (wt1) at ([yshift=-0.8em]t1.south) {\scriptsize{$\langle$sos$\rangle$}};
{
\node [wnode,anchor=north] (wt2) at ([yshift=-0.8em]t2.south) {\scriptsize{Have}};
......
Book/Chapter6/Figures/figure-decode-the-word-probability-distribution-at-the-first-position.tex
......@@ -16,7 +16,7 @@
\node [rnnnode,anchor=south] (s1) at ([yshift=1em]t1.north) {\scriptsize{$\textbf{s}_1$}};
}
\node [wnode,anchor=north] (wt1) at ([yshift=-0.8em]t1.south) {\scriptsize{$\langle$eos$\rangle$}};
\node [wnode,anchor=north] (wt1) at ([yshift=-0.8em]t1.south) {\scriptsize{$\langle$sos$\rangle$}};
{
\node [rnnnode,anchor=south,fill=blue!20] (o1) at ([yshift=1em]s1.north) {\scriptsize{Softmax}};
......
Book/Chapter6/Figures/figure-decoding-process-based-on-greedy-method.tex
......@@ -56,7 +56,7 @@
\node [anchor=west,inner sep=2pt] (o5) at ([xshift=0.3em]o4.east) {\tiny{...}};
}
{
\node [anchor=north,inner sep=2pt] (wt1) at ([yshift=-0.6em]t1.south) {\tiny{$\langle$eos$\rangle$}};
\node [anchor=north,inner sep=2pt] (wt1) at ([yshift=-0.6em]t1.south) {\tiny{$\langle$sos$\rangle$}};
}
{
\node [anchor=north,inner sep=2pt] (wt2) at ([yshift=-0.6em]t2.south) {\tiny{Have}};
......
Book/Chapter6/Figures/figure-example-of-mt-1.tex 0 → 100644
\begin{tikzpicture}
%第一段----------------------------------------------
%原文-------------
\node [pos=0.4,left,xshift=-36em,yshift=7.3em,font=\small] (original0) {原文：};
\node [pos=0.4,left,xshift=-2em,yshift=3.3em,font=\small] (original1) {
\begin{tabular}[t]{l}
\parbox{36em}{During Soviet times, if a city’s population topped one million, it would become eligible for its own metro. Planners wanted to brighten the lives of everyday Soviet citizens, and saw the metros, with their tens of thousands of daily passengers, as a singular opportunity to do so. In 1977, Tashkent, the capital of Uzbekistan, became the seventh Soviet city to have a metro built. Grand themes celebrating the history of Uzbekistan and the Soviet Union were brought to life, as art was commissioned and designers set to work. The stations reflected different themes, some with domed ceilings and painted tiles reminiscent of Uzbekistan’s Silk Road mosques, while others ...}
\end{tabular}
};
%译文1--------------mt1
\node[font=\small] (mt1) at ([xshift=0em,yshift=-9.1em]original0.south) {译文1：};
\node[font=\small] (ts1) at ([xshift=0em,yshift=-4em]original1.south) {
\begin{tabular}[t]{l}
\parbox{36em}{在苏联时代，如果一个城市的人口突破一百万，这将成为合资格为自己的地铁。规划者想去照亮每天的苏联公民的生命，看到地铁，与他们的数十每天数千乘客，作为一个独特的机会来这样做。1977年，塔什干，乌兹别克斯坦的首都，成了苏联第七城市建有地铁。宏大主题，庆祝乌兹别克斯坦和苏联的历史被带到生活，因为艺术是委托和设计师开始工作。车站反映了不同的主题，有的圆顶天花板和绘瓷砖让人想起乌兹别克斯坦是丝绸之路的清真寺，而另一些则装饰着...}
\end{tabular}
};
%{
%\draw[dotted,thick,ublue] ([xshift=10.3em,yshift=0.3em]mt8.south west)--%([xshift=-5.2em,yshift=-0.3em]ht8.north);
%}
\begin{pgfonlayer}{background}
{
\node[rectangle,draw=ublue, inner sep=0mm] [fit =(original0)(mt1)(mt1)(ts1)(original1)] {};
}
\end{pgfonlayer}
\end{tikzpicture}
\ No newline at end of file
Book/Chapter6/Figures/figure-example-of-mt-2.tex 0 → 100644
\begin{tikzpicture}
%-------译文2
\node [pos=0.4,left,xshift=-36em,yshift=7.3em,font=\small] (original0) {译文2：};
\node [pos=0.4,left,xshift=-2em,yshift=4.5em,font=\small] (original1) {
\begin{tabular}[t]{l}
\parbox{36em}{在苏联时期，如果一个城市的人口超过一百万，它就有资格拥有自己的地铁。 规划者想要照亮日常苏联公民的生活，并把拥有数万名每日乘客的地铁看作是这样做的一个绝佳机会。 1977年，乌兹别克斯坦首都塔什干成为苏联第七个修建地铁的城市。 随着艺术的委托和设计师们的工作，乌兹别克斯坦和苏联历史的宏伟主题被赋予了生命力。 这些电台反映了不同的主题，有的有穹顶和彩砖，让人想起乌兹别克斯坦的丝绸之路清真寺，有的则用...}
\end{tabular}
};
\begin{pgfonlayer}{background}
{
\node[rectangle,draw=ublue, inner sep=0mm] [fit =(original0)(original1)] {};
}
\end{pgfonlayer}
\end{tikzpicture}
\ No newline at end of file
Book/Chapter6/Figures/figure-process01.tex
......@@ -6,6 +6,7 @@
\setlength{\base}{0.9em}
\tikzstyle{rnnnode} = [rounded corners=1pt,minimum size=1\base,draw,inner sep=0pt,outer sep=0pt,fill=blue!30!white]
\tikzstyle{wordnode} = [font=\footnotesize,align=center]
\tikzstyle{test} = [rounded corners=1pt,minimum size=1\base,inner sep=0pt,outer sep=0pt]
\begin{scope}
% rnn[layer][step]
......@@ -27,7 +28,16 @@
\node[draw=red,thick,inner sep=5pt,rounded corners=0.3em,rotate fit=-45,label={[font=\scriptsize,align=center]90:正在运算的\\{\color{red} 循环单元}},fit=(rnn11)] () {};
}
% 占位
{
\node[test] (z2) at ([xshift=2\base]rnn10) {};
\node[test] (z3) at ([xshift=2\base]z2) {};
\node[test] (z4) at ([xshift=2\base]z3) {};
\node[test] (z5) at ([xshift=2\base]z4) {};
\node[test] (z6) at ([xshift=2\base]z5) {};
\node[test] (z7) at ([xshift=2\base]z6) {};
%\node[test] (z8) at ([xshift=2\base]z7) {};
}
% labels
%\alt<1-4>
......
Book/Chapter6/Figures/figure-process02.tex
......@@ -5,6 +5,7 @@
\setlength{\base}{0.9em}
\tikzstyle{rnnnode} = [rounded corners=1pt,minimum size=1\base,draw,inner sep=0pt,outer sep=0pt,fill=blue!30!white]
\tikzstyle{wordnode} = [font=\footnotesize,align=center]
\tikzstyle{test} = [rounded corners=1pt,minimum size=1\base,inner sep=0pt,outer sep=0pt]
\begin{scope}
% rnn[layer][step]
......@@ -38,6 +39,15 @@
\node[draw=red,thick,inner sep=5pt,rounded corners=0.3em,rotate fit=-45,label={[font=\scriptsize,align=center]90:正在运算的\\{\color{red} 循环单元}},fit=(rnn12) (rnn21)] () {};
}
% 占位
{
\node[test] (z2) at ([xshift=2\base]rnn11) {};
\node[test] (z3) at ([xshift=2\base]z2) {};
\node[test] (z4) at ([xshift=2\base]z3) {};
\node[test] (z5) at ([xshift=2\base]z4) {};
\node[test] (z6) at ([xshift=2\base]z5) {};
\node[test] (z7) at ([xshift=2\base]z6) {};
}
% labels
{
......
Book/Chapter6/Figures/figure-structure-of-a-recurrent-network-model.tex
......@@ -16,7 +16,7 @@
\node [anchor=north,rnnnode,fill=blue!30!white] (e2) at ([yshift=-1em]node12.south) {\scriptsize{}};
\node [anchor=north,rnnnode,fill=blue!30!white] (e3) at ([yshift=-1em]node13.south) {\scriptsize{}};
\node [anchor=north,rnnnode,fill=blue!30!white] (e4) at ([yshift=-1em]node14.south) {\scriptsize{}};
\node [anchor=north,inner sep=2pt] (w1) at ([yshift=-1em]e1.south) {\footnotesize{$<$eos$>$}};
\node [anchor=north,inner sep=2pt] (w1) at ([yshift=-1em]e1.south) {\footnotesize{$<$sos$>$}};
\node [anchor=north,inner sep=2pt] (w2) at ([yshift=-1em]e2.south) {\footnotesize{让}};
\node [anchor=north,inner sep=2pt] (w3) at ([yshift=-1em]e3.south) {\footnotesize{我们}};
\node [anchor=north,inner sep=2pt] (w4) at ([yshift=-1em]e4.south) {\footnotesize{开始}};
......
Book/Chapter6/Figures/figure-the-whole-of-LSTM.tex
......@@ -95,7 +95,7 @@
\draw[emph] (aux12) -- (aux22) -- (aux23);
\node[opnode,circle,draw=red,thick] () at (aux34) {$\sigma$};
\node[opnode,rectangle,rounded corners=2pt,inner sep=2pt,draw=red,thick] () at (aux35) {$\mathrm{tanh}$};
\node[opnode,circle,draw=red,thick] (i45) at (aux45) {X};
\node[opnode,circle,draw=red,thick] (i45) at (aux45) {};
}
{
\node[opnode,circle] (i45) at (aux45) {};
......@@ -103,22 +103,22 @@
\draw[-latex,standard] (aux21) -- (aux25) -- (u55);
\node[opnode,circle] () at (aux34) {$\sigma$};
\node[opnode,rectangle,rounded corners=2pt,inner sep=2pt] () at (aux35) {$\mathrm{tanh}$};
\node[opnode,circle] (i45) at (aux45) {X};
\node[opnode,circle] (i45) at (aux45) {};
}
% cell update
{
\draw[-latex,emph] (aux51) -- (aux59);
\node[opnode,circle,draw=red,thick] (f53) at (aux53) {X};
\node[opnode,circle,draw=red,thick] (u55) at (aux55) {\textbf{+}};
\node[opnode,circle,draw=red,thick] (f53) at (aux53) {};
\node[opnode,circle,draw=red,thick] (u55) at (aux55) {};
}
{
\draw[-latex,standard] (aux51) -- (aux59);
\node[opnode,circle] (f53) at (aux53) {X};
\node[opnode,circle] (u55) at (aux55) {\textbf{+}};
\node[opnode,circle] (f53) at (aux53) {};
\node[opnode,circle] (u55) at (aux55) {};
}
% output gate
{
\node[opnode,circle,draw=red,thick] (o27) at (aux27) {X};
\node[opnode,circle,draw=red,thick] (o27) at (aux27) {};
\draw[-latex,emph] (u55) -| (o27);
\draw[-latex,emph] (aux21) -- (o27);
\draw[emph] (aux12) -- (aux22) -- (aux23);
......@@ -129,7 +129,7 @@
\draw[-latex,emph] (o27) -| (aux68);
}
{
\node[opnode,circle] (o27) at (aux27) {X};
\node[opnode,circle] (o27) at (aux27) {};
\draw[-latex,standard] (u55) -| (o27);
\draw[-latex,standard] (aux21) -- (o27);
\node[opnode,circle] () at (aux26) {$\sigma$};
......@@ -157,6 +157,16 @@
\node[draw,very thick,rectangle,fill=blue!10!white,rounded corners=5pt,inner sep=4pt,fit=(aux22) (aux58) (u55) (o27)] (LSTM) {};
\end{pgfonlayer}
%%new
\draw[-] (i45.north west) -- (i45.south east);
\draw[-] (i45.north east) -- (i45.south west);
\draw[-] (f53.north west) -- (f53.south east);
\draw[-] (f53.north east) -- (f53.south west);
\draw [-,line width=0.8pt] (u55.north) -- (u55.south);
\draw [-,line width=0.8pt] (u55.west) -- (u55.east);
\draw[-] (o27.north west) -- (o27.south east);
\draw[-] (o27.north east) -- (o27.south west);
\begin{scope}
{
% forget gate formula
......
Book/Chapter7/Figures/figure-machine-translation-performance-curve.tex
......@@ -14,7 +14,9 @@
{\footnotesize
\node [anchor=south] (n4) at ([xshift=7em,yshift=5em]n1.north) {性能快速爬升阶段};
\node [anchor=west] (n5) at ([xshift=0em,yshift=-2em]n4.west) {数据的作用会非常明显};
\draw [-,very thick,draw=red] ([xshift=0.7em,yshift=3em]n1.north) .. controls +(north:5.9em) and +(south:0em) .. ([xshift=10em,yshift=9.6em]n1.north);
}
\draw [-,thick] ([xshift=2.3em,yshift=-2em]n4.east)--([xshift=2.3em,yshift=2em]n4.north east);
%\draw [-,thick] ([xshift=2.3em,yshift=-2em]n4.east)--([xshift=2.3em,yshift=2em]n4.north east);
\end{scope}
\end{tikzpicture}
\ No newline at end of file
Book/Chapter7/Figures/figure-post-norm-vs-pre-norm.tex
......@@ -6,16 +6,16 @@
\begin{scope}[minimum height = 20pt]
\node [anchor=east] (x1) at (-0.5em, 0) {$x_l$};
\node [anchor=west,draw=green,fill=green!20,inner xsep=5pt] (F1) at ([xshift=2em]x1.east){$\mathcal{F}$};
\node [anchor=west,draw,fill=red!20,inner xsep=5pt,rounded corners=2pt] (F1) at ([xshift=2em]x1.east){\small{$\mathcal{F}$}};
\node [anchor=west,circle,draw,minimum size=1em] (n1) at ([xshift=2em]F1.east) {};
\node [anchor=west,draw=green,fill=green!20,inner xsep=5pt] (ln1) at ([xshift=2em]n1.east){\textrm{LN}};
\node [anchor=west] (x2) at ([xshift=2em]ln1.east) {$x_{l+l}$};
\node [anchor=west,draw,fill=green!20,inner xsep=5pt,rounded corners=2pt] (ln1) at ([xshift=2em]n1.east){\small{\textrm{LN}}};
\node [anchor=west] (x2) at ([xshift=2em]ln1.east) {$x_{l+1}$};
\node [anchor=north] (x3) at ([yshift=-5em]x1.south) {$x_l$};
\node [anchor=west,draw=green,fill=green!20,inner xsep=5pt] (F2) at ([xshift=2em]x3.east){$\mathcal{F}$};
\node [anchor=west,draw=green,fill=green!20,inner xsep=5pt] (ln2) at ([xshift=2em]F2.east){\textrm{LN}};
\node [anchor=west,draw,fill=green!20,inner xsep=5pt,rounded corners=2pt] (F2) at ([xshift=2em]x3.east){\small{\textrm{LN}}};
\node [anchor=west,draw,fill=red!20,inner xsep=5pt,rounded corners=2pt] (ln2) at ([xshift=2em]F2.east){\small{$\mathcal{F}$}};
\node [anchor=west,circle,draw,,minimum size=1em] (n2) at ([xshift=2em]ln2.east){};
\node [anchor=west] (x4) at ([xshift=2em]n2.east) {$x_{l+l}$};
\node [anchor=west] (x4) at ([xshift=2em]n2.east) {$x_{l+1}$};
\draw[->, line width=1pt] ([xshift=-0.1em]x1.east)--(F1.west);
\draw[->, line width=1pt] ([xshift=-0.1em]F1.east)--(n1.west);
......@@ -25,8 +25,8 @@
\draw[->, line width=1pt] ([xshift=-0.1em]F2.east)--(ln2.west);
\draw[->, line width=1pt] ([xshift=0.1em]ln2.east)--node[above]{$y_l$}(n2.west);
\draw[->, line width=1pt] (n2.east)--(x4.west);
\draw[->, line width=1pt] (x1.north) -- ([yshift=1em]x1.north) -- ([yshift=1.4em]n1.north) -- (n1.north);
\draw[->, line width=1pt] (x3.north) -- ([yshift=1em]x3.north) -- ([yshift=1.4em]n2.north) -- (n2.north);
\draw[->,rounded corners,line width=1pt] ([yshift=-0.2em]x1.north) -- ([yshift=1em]x1.north) -- ([yshift=1.4em]n1.north) -- (n1.north);
\draw[->,rounded corners,line width=1pt] ([yshift=-0.2em]x3.north) -- ([yshift=1em]x3.north) -- ([yshift=1.4em]n2.north) -- (n2.north);
\draw[-] (n1.west)--(n1.east);
\draw[-] (n1.north)--(n1.south);
\draw[-] (n2.west)--(n2.east);
......@@ -39,8 +39,8 @@
\node [rectangle,inner sep=0.3em,fill=blue!10] [fit = (x3) (F2) (n2) (ln2) (x4) (k2)] (box1) {};
\end{pgfonlayer}
\node [anchor=north] (c1) at (box0.south){\small (a)后作方式的残差连接};
\node [anchor=north] (c2) at (box1.south){\small (b)前作方式的残差连接};
\node [anchor=north] (c1) at (box0.south){\footnotesize {(a)后作方式的残差连接}};
\node [anchor=north] (c2) at (box1.south){\footnotesize {(b)前作方式的残差连接}};
\end{scope}
\end{tikzpicture}
\end{center}
\ No newline at end of file
Book/Chapter7/Figures/figure-sublayer-skip.tex 0 → 100644
%%%------------------------------------------------------------------------------------------------------------
%%% 调序模型1：基于距离的调序
\begin{center}
\begin{tikzpicture}
\begin{scope}[minimum height = 20pt]
\node [anchor=east] (x1) at (-0.5em, 0) {$x_l$};
\node [anchor=west,draw,fill=red!20,inner xsep=5pt,rounded corners=2pt] (ln1) at ([xshift=1em]x1.east){\small{\textrm{LN}}};
\node [anchor=west,draw,fill=green!20,inner xsep=5pt,rounded corners=2pt] (f1) at ([xshift=0.6em]ln1.east){\small{$\mathcal{F}$}};
\node [anchor=west,circle,draw,,minimum size=1em] (n1) at ([xshift=3em]f1.east){};
\node [anchor=west] (x2) at ([xshift=1em]n1.east) {$x_{l+1}$};
\node [anchor=west,draw,fill=red!20,inner xsep=5pt,rounded corners=2pt] (ln12) at ([xshift=1em]x2.east){\small{\textrm{LN}}};
\node [anchor=west,draw,fill=green!20,inner xsep=5pt,rounded corners=2pt] (f12) at ([xshift=0.6em]ln12.east){\small{$\mathcal{F}$}};
\node [anchor=west,circle,draw,,minimum size=1em] (n12) at ([xshift=3em]f12.east){};
\node [anchor=west] (x22) at ([xshift=1em]n12.east) {$x_{l+2}$};
\node [anchor=north] (x3) at ([yshift=-5em]x1.south) {$x_l$};
\node [anchor=west,draw,fill=red!20,inner xsep=5pt,rounded corners=2pt] (ln2) at ([xshift=1em]x3.east){\small{\textrm{LN}}};
\node [anchor=west,draw,fill=green!20,inner xsep=5pt,rounded corners=2pt] (f2) at ([xshift=0.6em]ln2.east){\small{$\mathcal{F}$}};
\node [anchor=west,minimum size=1em] (p1) at ([xshift=1em]f2.east){};
\node [anchor=north] (m1) at ([yshift=0.6em]p1.south){\tiny{\red{$M=1$}}};
\node [anchor=west,circle,draw,,minimum size=1em] (n2) at ([xshift=3em]f2.east){};
\node [anchor=west] (x4) at ([xshift=1em]n2.east) {$x_{l+1}$};
\node [anchor=west,draw,fill=red!20,inner xsep=5pt,rounded corners=2pt] (ln22) at ([xshift=1em]x4.east){\small{\textrm{LN}}};
\node [anchor=west,draw,fill=green!20,inner xsep=5pt,rounded corners=2pt] (f22) at ([xshift=0.6em]ln22.east){\small{$\mathcal{F}$}};
\node [anchor=west,minimum size=1em] (p2) at ([xshift=1em]f22.east){};
\node [anchor=north] (m2) at ([yshift=0.6em]p2.south){\tiny{\red{$M=0$}}};
\node [anchor=west,circle,draw,,minimum size=1em] (n22) at ([xshift=3em]f22.east){};
\node [anchor=west] (x42) at ([xshift=1em]n22.east) {$x_{l+2}$};
\draw[->, line width=1pt] ([xshift=-0.1em]x1.east)--(ln1.west);
\draw[->, line width=1pt] ([xshift=-0.1em]ln1.east)--(f1.west);
\draw[->, line width=1pt] ([xshift=0.1em]f1.east)--(n1.west);
\draw[->, line width=1pt] (n1.east)--(x2.west);
\draw[->, line width=1pt] ([xshift=-0.1em]x3.east)--(ln2.west);
\draw[->, line width=1pt] ([xshift=-0.1em]ln2.east)--(f2.west);
\draw[-, line width=1pt] ([xshift=0.1em]f2.east)--(p1.west);
\draw[*-,red,line width=0.6pt] (p1.west) -- (p1.east);
\draw[->, line width=1pt] (p1.east)--(n2.west);
\draw[->, line width=1pt] (n2.east)--(x4.west);
\draw[->,rounded corners,line width=1pt] ([yshift=-0.2em]x1.north) -- ([yshift=1em]x1.north) -- ([yshift=1.4em]n1.north) -- (n1.north);
\draw[->,rounded corners,line width=1pt] ([yshift=-0.2em]x3.north) -- ([yshift=1em]x3.north) -- ([yshift=1.4em]n2.north) -- (n2.north);
\draw[-] (n1.west)--(n1.east);
\draw[-] (n1.north)--(n1.south);
\draw[-] (n2.west)--(n2.east);
\draw[-] (n2.north)--(n2.south);
\draw[->, line width=1pt] ([xshift=-0.1em]x2.east)--(ln12.west);
\draw[->, line width=1pt] ([xshift=-0.1em]ln12.east)--(f12.west);
\draw[->, line width=1pt] ([xshift=0.1em]f12.east)--(n12.west);
\draw[->, line width=1pt] (n12.east)--(x22.west);
\draw[->, line width=1pt] ([xshift=-0.1em]x4.east)--(ln22.west);
\draw[->, line width=1pt] ([xshift=-0.1em]ln22.east)--(f22.west);
\draw[-, line width=1pt] ([xshift=0.1em]f22.east)--(p2.west);
\draw[*-,red,line width=0.6pt] ([yshift=-0.1em]p2.west) -- (p2.north east);
\draw[->, line width=1pt] (p2.east)--(n22.west);
\draw[->, line width=1pt] (n22.east)--(x42.west);
\draw[->,rounded corners,line width=1pt] ([yshift=-0.2em]x2.north) -- ([yshift=1em]x2.north) -- ([yshift=1.4em]n12.north) -- (n12.north);
\draw[->,rounded corners,line width=1pt] ([yshift=-0.2em]x4.north) -- ([yshift=1em]x4.north) -- ([yshift=1.4em]n22.north) -- (n22.north);
\draw[-] (n12.west)--(n12.east);
\draw[-] (n12.north)--(n12.south);
\draw[-] (n22.west)--(n22.east);
\draw[-] (n22.north)--(n22.south);
\node [anchor=south] (k1) at ([yshift=-0.1em]x1.north){};
\node [anchor=south] (k2) at ([yshift=-0.1em]x3.north){};
\begin{pgfonlayer}{background}
\node [rectangle,inner sep=0.3em,fill=orange!10] [fit = (x1) (f1) (n1) (ln1) (x2) (k1) (f12) (n12) (ln12) (x22)] (box0) {};
\node [rectangle,inner sep=0.3em,fill=blue!10] [fit = (x3) (f2) (n2) (ln2) (x4) (k2) (f22) (n22) (ln22) (x42)] (box1) {};
\end{pgfonlayer}
\node [anchor=north] (c1) at (box0.south){\footnotesize {(a)标准的Pre-Norm}};
\node [anchor=north] (c2) at (box1.south){\footnotesize {(b)基于随机子层跳跃的Pre-Norm}};
\end{scope}
\end{tikzpicture}
\end{center}
\ No newline at end of file
Markdown 格式
0% 或
您添加了 0 人 到此讨论。请谨慎行事。
请先完成此评论的编辑！
请 注册 或者 后发表评论